THE EFFECT OF Pb ON MICROSTRUCTURE, MECHANICAL PROPERTES AND MACHINABILITY OF IN-SITU Al-15%Mg2Si COMPOSITE

سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,155

فایل این مقاله در 15 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

IMES06_123

تاریخ نمایه سازی: 8 بهمن 1391

چکیده مقاله:

Mechanical and physical properties of light metal matrix composite (MMC) indicate that these materials play an important role in engineering applications. In this research, the effect of Pb on the microstructure and machinability of Al-15%Mg2Si composite were investigated. Machining test was carried out on different composition of Pb added composites (varying from 0.1 to 5%wt. Pb). Characterization of the composite specimens was carried out by optical and scanning electron microscopy (SEM). The result show- In constant machining parameters, e.g. cutting speed, feed and depth of cut, Pbaddition in lower contents has no influence on the machinability of the composite. But, at higher content (> 1 wt. %Pb), the machinability has been improved. The microstructural examination showed that addition of Pb change the morphology of primary and secondary Mg2Si particle. It was also found that theaddition of 1%Pb reduces the average size of primary Mg2Si from 45 μm to 13 μm. As the mount of Pbincreased up to 1 wt.%, ultimate tensile strength (UTS) and elongation values were also increased from 167 MPa and 2.7% to 195 MPa and 4.3%, respectively

کلیدواژه ها:

Metal matrix composite (MMC) ، Mg2Si particles ، Machinability

نویسندگان

Khosro Emami

Shahid Rajaee Teacher training University, Tehran, Iran

Massoud Emamy

school of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, Tehran, P.O. Box: ۱۴۳۹۵-۷۳۱, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Palanikumar K. and Karthikeyan R., Assessment of factors influencing surface ...
  • Qin Q. D., Zhao Y. G., Liu C., Cong P. ...
  • Lu L., Lai M. O. and Hoe M. L., Formation ...
  • Arsenault R.J., Wang L. and Feng C.R., Strengthening of components ...
  • J. Lock, Metal matrix composites: From strength to strength, Professional ...
  • Konig W. and Erinski D., Machining and Machinability of Aluminum ...
  • Yuan Z. J. and Dong Geng S., Ultra precision machining ...
  • El-Gallab M. and Sklad M., Machining of Al/SiC Monaghan JM. ...
  • Tash M., Samuel F.H., Mucciardi F., Doty H. W. and ...
  • Zhang J., Fan Z, , Wang Y. Q. and Zhou ...
  • Ratke L. and Diefenbach S., Liquid immiscible alloys. Mater. Sci. ...
  • Qin Q. D, Zhao Y. G, Zhou W. and Cong ...
  • Mannaa A. and Bhattacharayya B., A study on machinability of ...
  • Tash M., Samuel F.H., Mucciardi F., Doty H.W. and Valtierra ...
  • Kamiya M., Yakou T, Sasaki T. and Nagatsuma Y., Effect ...
  • Wang E. R., Hui X. D., Wang S. S., Zhao ...
  • نمایش کامل مراجع