THE EFFECT OF Al–5Ti–1B AND Al–15Zr MASTER ALLOYS ON THE MICROSTRUCTURE AND TENSILE PROPERTIES OFEXTRUDED AA2014 Al ALLOY

سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,123

فایل این مقاله در 12 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

IMES06_080

تاریخ نمایه سازی: 8 بهمن 1391

چکیده مقاله:

This study was undertaken to investigate the effect of Al–5Ti–1B and Al–15Zr master alloys on the structural characteristics and tensile properties of extruded AA2014 aluminum alloy. The results revealed that the optimum Ti and Zr contents to achieve a fine-grained were found to be 0.03 wt.% and 0.5 wt.%, respectively. The average grain size decreased from 1000 μm to 162 μm and 203 μm,respectively with adding 0.03 wt.%Ti and 0.5 wt.% Zr. The results of tensile testing of the extruded specimens showed enhanced ultimate tensile strength (UTS) and elongation (%El) values of the 2014 alloy after Ti and Zr additions in optimum levels. Furthermore, with adding 0.5 wt.%Zr, tensile strength and elongation values of the extruded refined sample increased from 282 MPa and 12% to 379 MPa and17%, respectively. Also, with adding 0.03%Ti, tensile strength values of the extruded refined samplewere enhanced from 282 MPa to 370 Mpa, but elongation decreased from 12% to 8%. This could be attributed to uniform distribution of Al3Zr & Al3Ti particles in the α-Al matrix and the breakdown of Ɵ & S phases by applying of extrusion process

کلیدواژه ها:

نویسندگان

Peyman Inanloo

Imam Khomeini International University, Qazvin, Iran

Massoud Emamy

school of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, Tehran, P.O. Box: ۱۴۳۹۵-۷۳۱, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Gavgali M. and Aksakal B., Effects of various homogen ization ...
  • Mondolfo L. F., Barlock J. G. and Tomeo A. B., ...
  • Naga Raju P., Srinivasa Rao K., Reddy G. M, Kamaraj ...
  • Birol Y., The performance of Al-Ti-C grain refiners in twin-roll ...
  • Yu K., Li W., Li S. and Zhao J., Mechanical ...
  • Lee C. and Chen S., Quantities of grains of aluminum ...
  • Murray J, Peruzzi A. and Abriata J P., The Al-Zr ...
  • Deschamps A. and Brechet Y., Influence of quench and heating ...
  • Waheed A. and Lorimer G.W., Pinning of subgrain boundaries by ...
  • Sigworth G. K. and Kuhn T. K., American Foundry Society ...
  • Murty B. S., Kori S. A. and Chakraborty M., Grain ...
  • Quested T. E. and Greer A. L., The effect of ...
  • Rokhlin L. L., Dobatkina T. V., Bochvar N. R. and ...
  • Senkov O. N., Bhat R.B., Senkova S.V. and Schloz J.D., ...
  • Fig. 3. Macrographs of: (a) Un-refined alloy, (b) Ti-refined alloy ...
  • Fig. 5. The back-scatter images of the AA2013 alloys (a) ...
  • نمایش کامل مراجع