EFFECT OF PRE-DEFORMATION ON THE MICROSTRUCTURE OF AL- 5%Ti-B GRAIN REFINED AL2014 ALLOY IN THE SIMA PROCESS
سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,414
فایل این مقاله در 14 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IMES06_061
تاریخ نمایه سازی: 8 بهمن 1391
چکیده مقاله:
Achieving a globular microstructure before conducting semi-solid forming (SSF) techniques has a great influence on final properties. In this research Al2014 alloy with a globular microstructure was producedvia new strain induced melt activation (SIMA) process. In order to study the effect of pre-deformation in the SIMA process, various height reduction percentages (HR%) (10%, 20% and 30%) were applied on specimens through cold upsetting. Cold worked specimens were heat treated up to 635 oC, for 30 minutesand then quenched in cold water. Observation with optical and scanning electron microscopy (SEM)showed that by increasing the height reduction percentage, average grain size decreases significantly.Further results showed that with increasing height reduction percentage, sphericity increases to some extent
کلیدواژه ها:
نویسندگان
M. Amuei
School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, Tehran, P.O. Box: ۱۴۳۹۵-۷۳۱, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :