A Review on Chipless RFID Tag Design
محل انتشار: مجله مهندسی برق مجلسی، دوره: 7، شماره: 2
سال انتشار: 1392
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 102
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_MJEE-7-2_008
تاریخ نمایه سازی: 3 آبان 1402
چکیده مقاله:
The demand for RFID tags has recently increased due to the development of the RFID. Over the past decade, great efforts have been devoted to the design of RFID tags without chip inside. The concept of chipless RFID tags appears to be a promising solution for low cost item tagging because the cost of active RFID tag depends mainly on the chip used in them. This paper presents the progress of the chipless RFID tag and introduces major studies in this filed. Advantages and disadvantages of these methods are pointed out.對無芯片RFID標籤設計回顧摘要用於RFID標籤的需求,最近增加,由於該RFID的發展。在過去的十年中,大力一直致力於內部的RFID標籤的設計沒有芯片。無芯片RFID標籤的概念似乎是低成本產品標籤有前途的解決方案,因為有源RFID標籤的成本主要取決於在其中所使用的芯片上。本文介紹了無芯片RFID標籤的進展,並在該申請引入重大研究。優點和這些方法的缺點指出。
کلیدواژه ها:
نویسندگان
Ali Hashemi
Department of Electrical Engineering, Technical & Vocational University, Mohajer Center, Isfahan, Iran.
Amir Hossein Sarhaddi
Department of Electrical Engineering, Majlesi Branch, Islamic Azad University, Isfahan, Iran
Hossein Emami
Young Researchers Club, Majlesi Branch, Islamic Azad University, Isfahan, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :