Fracture energy modeling in vibration in UIC۶۰ steel railway wheels and tracks repaired by hybrid nanoparticles and GMAW welding
سال انتشار: 1402
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 106
فایل این مقاله در 13 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
EITCONF02_106
تاریخ نمایه سازی: 3 مهر 1402
چکیده مقاله:
The elastic and plastic inhomogeneous shape and the asymmetric deformation of the train wheel and railway tracks are classified in mechanical behavior and crystal structure defects in non-uniform vibration distribution. In this experimental research, vibration analysis in failure limit and charpy test was investigated in the Gas Metal Arc Welding (GMAW) process in UIC۶۰ railway tracks steel repaired with the mixed addition of three nanoparticles (۷۰% SiO۲ + ۲۰% TiO۲ + ۱۰% Al۲O۳). Fifty-two samples were tested for failure by the charpy impact test. The results show the effect of nanoparticles added to the repair railway tracks on the deformation rate of the weld zone and the load-bearing limit. Four vibration models were used to investigate the vibration on the Steel UIC۶۰ railway tracks repaired to find the safe area and the unsafe zone. The results of the models showed that the most consistent model compared to the obtained results are, Miranda and Bertro (B), Vidik (V), Krewinler and Nassar (K&N), and Newmark and Hall (N&H), respectively
کلیدواژه ها:
نویسندگان
Ali Alizadeh
Department of Mechanical Engineering, Faculty of Engineering, Razi University, Kermanshah, Iran
Amir Aslan Mosaferi
Department of Mechanical Engineering, Faculty of Engineering, Kharazmi University, Tehran, Iran
Salar Farzad-Rik
Faculty of Mechanical Engineering, Semnan University, Semnan, Iran
Hadi Tagimalek
Faculty of Mechanical Engineering, Semnan University, Semnan, Iran