High-Strength Bainitic Steels
سال انتشار: 1383
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 105
فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_ISSIRAN-1-1_003
تاریخ نمایه سازی: 5 شهریور 1402
چکیده مقاله:
With careful design, mixed microstructures consisting of fine plates of upper bainitic ferrite separated by thin films of stable retained austenite have exhibited impressive combinations of strength and toughness in highsilicon bainitic steels. The silicon suppresses the precipitation of brittle cementite leading to an improvement in toughness. The essential principles governing the optimisation of such microstructures are well established, particularly that large regions of unstable high-carbon retained austenite must be avoided. The aim of the present work was to see how far these concepts can be extended to achieve the highest ever combination of strength and toughness in bulk-samples, consistent with certain hardenability and processing requirements.
کلیدواژه ها:
نویسندگان
F. G. Caballero
Department of Physical Metallurgy, Centro Nacional de Investigaciones Metalúrgicas (CENIM), Spain
H. K. D. H. Bhadeshia
Department of Materials Science and Metallurgy, University of Cambridge, Pembroke Street, Cambridge CB۲ ۳QZ, UK.
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :