Buckling Analysis of a Double-Walled Carbon Nanotube Embedded in an Elastic Medium Using the Energy Method
محل انتشار: فصلنامه مکانیک جامد، دوره: 1، شماره: 4
سال انتشار: 1388
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 82
فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JSMA-1-4_003
تاریخ نمایه سازی: 28 مرداد 1402
چکیده مقاله:
The axially compressed buckling of a double-walled carbon nanotabe surrounded by an elastic medium using the energy and the Rayleigh-Ritz methods is investigated in this paper. In this research, based on the elastic shell models at nano scale, the effects of the van der Waals forces between the inner and the outer tubes, the small scale and the surrounding elastic medium on the critical buckling load are considered. Normal stresses at the outer tube medium interface are also included in the current analysis. An expression is derived relating the external pressure to the buckling mode number, from which the critical pressure can be obtained. It is seen from the results that the critical pressure is dependent on the outer radius to thickness ratio, the material parameters of the surrounding elastic medium such as Young’s modulus and Poisson’s ratio. Moreover, it is shown that the critical pressure descend very quickly with increasing the half axial wave numbers.
کلیدواژه ها:
نویسندگان
A Ghorbanpour Arani
Department of Mechanical Engineering, University of Kashan
M Shokravi
Department of Mechanical Engineering, University of Kashan
M Mohammadimehr
Department of Mechanical Engineering, University of Kashan
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :