Finite Element Modeling of Crack Initiation Angle Under Mixed Mode (I/II) Fracture
محل انتشار: فصلنامه مکانیک جامد، دوره: 2، شماره: 3
سال انتشار: 1389
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 81
فایل این مقاله در 17 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JSMA-2-3_003
تاریخ نمایه سازی: 28 مرداد 1402
چکیده مقاله:
Present study deals with the prediction of crack initiation angle for mixed mode (I/II) fracture using finite element techniques and J-Integral based approach. The FE code ANSYS is used to estimate the stress intensity factor numerically. The estimated values of SIF were incorporated into six different crack initiation angle criteria to predict the crack initiation angle. Single edge crack specimens of Araldite-Hardener were used for the present analysis. Load was applied up to critical limit of the specimens containing crack at different angles of inclination. The crack initiation angle obtained using stress intensity factor and J-integral based approach were found close to each other and also found to be in good agreement with the available experimental results in literature. It is also investigated that as crack inclination angle increases material was found to behave in a brittle manner.
کلیدواژه ها:
نویسندگان
S.S Bhadauria
Department of Applied Mechanics, Maulana Azad National Institute of Technology Bhopal
K.K Pathak
Advanced Materials Processes Research Institute (CSIR)
M.S Hora
Department of Applied Mechanics, Maulana Azad National Institute of Technology Bhopal
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :