AN INFLUENCE OF PHASE DEVELOPMENT ON MECHANICAL STRENGTH OF ALUMINA-COPPER JOINT PREPARED BY MOLYMn METHOD

Abstract: The effect of phase development on peel strength of alumina-copper metalized joint has been investigated. The alumina-copper joint was prepared in three stages. The alumina substrate was, first, metalized at ۱۵۰۰°C in H۲-furnace by a new formulation. In the second step, a nickel layer was electroplated on the metalized layer with approximately ۱۰µm thickness. Finally, copper strips were bonded to metalized alumina with Ag-Cu (۷۲-۲۸) filler metal. The peel strength of the joint was ۹.۵±۰.۵ Kg/cm which shows approximately ۳۰% increase in comparison to previous works. By study of fracture surface and crack propagation path, it has been concluded that this increase is due to the formation of more spinel phase.

کلیدواژه ها:

Alumina-copper joint ، Metalization ، Spinel phase ، Peel strength