SIMULATION OF NICKEL ELECTROFORMING PROCESS OF A REVOLVING PART USING FINITE ELEMENT METHOD
محل انتشار: مجله علم مواد و مهندسی ایران، دوره: 12، شماره: 1
سال انتشار: 1393
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 128
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJMSEI-12-1_003
تاریخ نمایه سازی: 26 مرداد 1402
چکیده مقاله:
n this paper a finite element model has been proposed for evaluation of primary and secondary current
density values on the cathode surface in nickel electroplating operation of a revolving part. In addition, the capability
of presented electroplating simulation has been investigated in order to describe the electroplated thickness of the
nickel sulfate solution. Nickel electroplating experiments have been carried out. A good agreement between the
simulated and experimental results was found. Also the results showed that primary current density can describe the
general form of thickness distribution but the relative value of current density using secondary current density can
present better description of thickness distribution
کلیدواژه ها: