Melt Rheology and Morphology Properties of PA6/ABS Nanocomposites
محل انتشار: چهاردهمین کنگره ملی مهندسی شیمی ایران
سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,344
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NICEC14_599
تاریخ نمایه سازی: 3 آذر 1391
چکیده مقاله:
In this work the nonlinear viscoelastic properties of polyamide 6/ Acrylonitrile–Butadiene–Styrene (PA6/ABS) nanocomposite blends have been investigated. Overshoots were observed for the start-up experiments. The height of these overshoots increased with the applied shear rate. The overshoots are highly related to the network structure of the nanocomposite blends and the magnitude of the overshoots increases with increasing nanoclay content. Characterization of nanocomposite samples morphology by scanning electron microscopy (SEM) indicated that with increasing nanoclay loading, size of dispersing phase droplets decreases and their uniformity improve significantly
کلیدواژه ها:
نویسندگان
A Mojarrad
Islamic Azad University, Science and Research Branch, Tehran, Iran
A Ramazani S.A
Department of Chemical and Petroleum Engineering, Sharif University of Technology, Tehran, Iran
I Ghasemi
Iran Polymer and Petrochemical Institute, P.O. Box ۱۴۹۶۵/۱۱۵, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :