Numerical Study of Changes in Length-to-Diameter Ratio of a Cylindrical Diffuser, Used in a Vacuum Test Stand
محل انتشار: مجله علوم و مهندسی هوافضا، دوره: 13، شماره: 1
سال انتشار: 1399
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 97
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JASTI-13-1_003
تاریخ نمایه سازی: 8 مرداد 1402
چکیده مقاله:
The vacuum test stand simulates the space systems' engines with a high expansion ratio at high altitudes and vacuum pressure for static tests. This article investigates the flow stability in the diffuser to use in a vacuum stand. Several variables are essential in the operation of this system, including the diffuser length, the location of the nozzle relative to the diffuser, the dimensions of the vacuum chamber, and the diffuser length-to-diameter ratio. In this numerical study, the diffuser length-to-diameter ratio is investigated applied at different pressures by the rocket engine to the stand. These results are performed in three length-to-diameter ratios of ۶, ۸, and ۱۰, and the applied pressure varies from ۳۰ to ۵۰ bar. With an increase in the geometric ratio of diffuser length-to-diameter, stable conditions can be created in the diffuser at lower applied pressures.
کلیدواژه ها:
نویسندگان
Ali Reza Nadri
Aerospace University Complex of Malek Ashtar University
Hamid Reza Shidvash
Department of Aerospace University Complex, Malek Ashtar University of Technology, Tehran, IRAN
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :