A Method for Selection of Optimum Solidity in Design of a Tandem Compressor Blade Row
محل انتشار: مجله علوم و مهندسی هوافضا، دوره: 16، شماره: 1
سال انتشار: 1402
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 70
فایل این مقاله در 14 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JASTI-16-1_002
تاریخ نمایه سازی: 8 مرداد 1402
چکیده مقاله:
In the current article, using results of previous researches, a guideline has been developed to select a proper value for solidity of a tandem blade row in an axial flow compressor stage. Next, using this guideline, a highly loaded tandem compressor stage has been designed. To verify the selected solidity value, some other cases have been designed with different solidity values. Other geometrical parameters have been selected similarly in all cases. At the next stage, a three dimensional numerical model is developed to predict the characteristic performance of each tandem stage. The model is validated with the experimental results of NASA Stage and Rotor ۳۷, and the level of the accuracy of the model is presented. Using a similar model, the performance of all cases has been derived and the effect of solidity variation on the overall performance of machine has been discussed. Lastly, the effect of solidity variation on the tip leakage flow structure near peak efficiency point is discussed for all cases.
کلیدواژه ها:
نویسندگان
Hamzeh Eshraghi
Department of Aerospace Engineering, Amirkabir University of Technology, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :