The Effect of Using Composite Primers, Silane and Surface Roughening on the Shear Bond Strength of Metal Brackets bonded to Old Composites
محل انتشار: مجله تحقیقات دندانپزشکی، دوره: 14، شماره: 3
سال انتشار: 1401
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 169
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_AJDR-14-3_003
تاریخ نمایه سازی: 28 تیر 1402
چکیده مقاله:
Background: One of the effective factors in successful orthodontic treatment is the use of appropriate bond
between the orthodontic bracket and surface of the composite restoration. The aim of this study was to
evaluate the effect of using composite primers, silane, and surface roughening on the shear bond strength
of metal brackets bonded to old composites.
Methods: In this laboratory study, ۹۰ composite disks (Z۳۵۰ ۳M) measuring ۴ by ۶ mm were kept in
distilled water for ۱ week and subjected to ۵۰۰۰°C heating rotation (rpm). These samples were divided into
۶ groups based on the use of composite primer, surface roughening, and silane as follows: Group ۱ (Control):
old composite + ۳۷ % acid etching, Group ۲: Old composite + ۳۷% acid etching + ۲۰ s cure. Group ۳: Old
composite + ۳۷% acid etching + ۵ s air-drying, Group ۴: Old composite + acid etching + rubbing, Group
۵: Old composite + roughing with diamond bur, Group ۶: Old composite + Acid etching + roughing with
diamond bur metal brackets were attached to the specimens and the specimens were immersed in water
and in a thermal rotation system of ۵۰۰۰ rpm for ۱ week. The shear bond strength of the brackets was
measured.
Results: The highest and the lowest shear bond strength values were found in the fourth and control groups,
respectively, indicating a significant difference across all groups (P = ۰.۰۰۱). In this regard, the results
of least significant difference (LSD) test also showed that the mean shear bond strength of orthodontic
brackets in the control group was significantly lower than that observed in other experimental groups, but
without significant difference across the pointed groups.
Conclusions: The use of surface roughness, composite primer, and silane together do not have a cumulative
effect on the increase of the bond strength between old composite and orthodontic brackets. However, the
use of each alone can increase the shear bond strength.
کلیدواژه ها:
نویسندگان
Mohammad Ali Mohammadi Torkani
Assistant Professor, Department of Cosmetics Dentistry, Dental Faculty, Urmia University of Medical Science, Urmia, Iran- Lecturer at Griffith University, Gold Coast, Australia
Mohammad Hussein Razeghi Nezhad
Assistant Professor, Department of Orthodontics, Dental Faculty, Urmia University of Medical Science, Urmia, Iran
Arman Goodarzi
Dentist, Private Practice, Urmia University of Medical Science, Urmia, Iran
Saman Taram
Dental Student, Dental Faculty, Urmia University of Medical Science, Urmia, Iran