CFD analysis of burner designe in autothermal reformers
سال انتشار: 1401
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 206
این مقاله فقط به صورت چکیده توسط دبیرخانه ارسال شده است و فایل کامل قابل دریافت نیست. برای یافتن مقالات دارای فایل کامل، از بخش [جستجوی مقالات فارسی] اقدام فرمایید.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
OGPC04_055
تاریخ نمایه سازی: 25 اردیبهشت 1402
چکیده مقاله CFD analysis of burner designe in autothermal reformers
An auto thermal reforming reactor is divided into two parts consisting of a combustion chamber followed by a catalyst bed. The geometry of the combustion zone and burner has a direct effect on the degree of mixing between the process gas and oxygen. In this study, using computational fluid dynamics (CFD), the effect of different burners on the combustion reaction in the combustion chamber has been investigated. The results showed that the optimal location of the burner is before the bottleneck, because in this case, by increasing the gas speed during the combustion process, the length of the flame becomes longer and the output temperature increases.
کلیدواژه های CFD analysis of burner designe in autothermal reformers:
نویسندگان مقاله CFD analysis of burner designe in autothermal reformers
Saeedeh hamoudi
Faculty of Petroleum, Gas and Petrochemical Engineering, Persian Gulf University, Bushehr ۷۵۱۶۹, Iran
Nahid Raiszadeh
Faculty of Petroleum, Gas and Petrochemical Engineering, Persian Gulf University, Bushehr ۷۵۱۶۹, Iran
Azadeh mirvakili
Faculty of Petroleum, Gas and Petrochemical Engineering, Persian Gulf University, Bushehr ۷۵۱۶۹, Iran