Investigating Metal Injection Molding of ۴۶۰۵ low-alloy steel feedstock:Parametric optimization of the injection stage using RSM Technique
سال انتشار: 1401
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 134
فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICME19_020
تاریخ نمایه سازی: 19 اردیبهشت 1402
چکیده مقاله:
In this study, we demonstrate the injection stage of MetalInjection Molding (MIM) process to fabricate a small bendtypecomponent. This non-standard but critical engine part ismade of a feedstock from the low alloy steel ۴۶۰۵. Tooptimize various injection parameters, the five-variable Box-Behnken Design (BBD) is used with the assumption of aquadratic model, together with the statistical method ofResponse Surface Methodology (RSM). Samples are thenfabricated and their densities are measured. Hence, thesignificance of these factors as well as the mutual couplingbetween each two parameters are investigated using theanalysis of variance (ANOVA). Finally, this paper reveals thatinjection temperature of ۱۵۵ ◦C, the injection speed ۸۰ mm/s,holding pressure of ۸۳ bar, holding time of ۹ s and theinjection pressure of ۱۳۲ bar lead to an optimum density of thegreen part, which becomes ۴.۸۹۲ g/cm۳. Then, a new sampleis produced using these optimized settings, and the greencomponent density is measured, which is extremely near to thepredicted value.
کلیدواژه ها:
Metal Injection Molding- Low alloy steel-Feedstock- Density- Response Surface Methodology
نویسندگان
Sina Rezaei
MSc graduated, Department of Materials Engineering, Science & Research Branch, Islamic Azad University, Tehran, Iran
Ali Askari
Assistant Professor, Department of Mechanical Engineering, Karaj Branch, Islamic Azad University, Karaj, Iran.