Hybrid components: Enhancing bonding strength between ۳D-printed aluminium substrates and CFRP
سال انتشار: 1401
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 173
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
MECCONF06_010
تاریخ نمایه سازی: 18 اردیبهشت 1402
چکیده مقاله:
Carbon Fibre Reinforced Plastics (CFRP) are being utilised as materials within hybrid components, in combination with plastics and metals. Although hybrid components provide a combination of advantages from the constituent materials, there are some challenges for the manufacture of high-quality hybrid components, such as weak interface bonding between constituent materials. This research focuses on utilising Additive Manufacturing (AM) technology to control the substrate's surface features to enhance the interfacial bonding. For this purpose, different surface structures were designed and manufactured using AM technology to understand the influence of surface feature on the interface. This parametric study has been conducted on aluminium ۳D printed substrate. The results from Short Beam Shear (SBS) and Flatwise Tensile tests on ۳D printed substrates indicated that interlaminar shear strength of the hybrid component increased by almost ۲۰۰% compares to standard hybrid laminate with non-printed substrate and the normal bonding strength between ۳D printed substrate can be improved significantly (Almost ۱۰۰%).
کلیدواژه ها:
نویسندگان
Hamed Abdoli
PhD candidate, University of Auckland, New Zealand
Olaf Diegel
Professor, University of Auckland, New Zealand
Simon Bickerton
Professor, University of Auckland, New Zealand