Designing Model to Identifying Optimal Services, Integrated System, Registration of Pharmaceutical
محل انتشار: فصلنامه زیست پزشکی جرجانی، دوره: 10، شماره: 4
سال انتشار: 1401
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 204
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JOBJ-10-4_004
تاریخ نمایه سازی: 16 اردیبهشت 1402
چکیده مقاله:
Background and Objectives: One of the complicated processes in the Ministry of Health is the process of registering pharmaceuticals .Since there are different soft wares for registration of products, and since parallel services concuss waste of time and money, it is necessary to provide integrated software in the form of services. This goal can be achieved when services are identified and combined in integrated soft wares.
Material and Methods: present study is an applied research, In order to identify the services of an integrated system for recording pharmaceutical supplies, first the Gray-Wolf multi-objective optimization (GWO) algorithm was proposed. Then the values of the algorithm parameters were extracted by the goal-based requirements analysis method and the algorithm was implemented. Finally the best services were extracted by the hierarchical analysis process.
Results: Considering that the results of present study are an operational project in the Ministry of Health, by implementing the algorithm proposed by Gray Wolf, services were identified, which can be used to create integrated software for registering pharmaceutical supplies.
Conclusion: Creating an integrated system for registering pharmaceutical supplies is one of the important challenges of the Ministry of Health. This can be achieved by identifying services and combining these services to create an integrated system.
کلیدواژه ها:
Integrated System ، Gray-Wolf Optimizer (GWO) ، Hierarchical ، Analysis Process (AHP) ، Goal-Based Requirements Analysis Method (GBRAM)
نویسندگان
kobra sharifiyan
Ph.D. Student in Industrial Engenering, Department of Industrial Engineering, Science and Research branch, Islamic Azad University
Mohammad Jafar Tarokh
Professor,Department of Industrial Engineering,K.N. Toosi University of Technology
Seyed Alireza Hashemi Golpayegani
Professor, Department of Computer Engineering and Information Technology, Amirkabir University of Technology
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :