in situ formation of Fe-TiC composite layer on steel through GTA hardfacing of Ti bearing paste
محل انتشار: کنگره بین المللی جوش و روشهای اتصال
سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,132
فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IIWC01_054
تاریخ نمایه سازی: 6 مهر 1391
چکیده مقاله:
in this paper microstructure and properties of TiC particle reinforced fe-based composite coatings produced by gas tungsten arc GTA hardfacting were studied the mixture of ferrotitanium FeTi powder and different amount of graphite was preplaced on a st37 steel substrate ,the surface was heated by GTA heat source the microstructure of the composite coating was investigated by means of a scanning electron microscopy SEM and energy dispersive spectrometer EDS welding tracks were found with o crack or porosity the results showed that assumed composite coatings can be achieved under suitable welding parameters.
کلیدواژه ها:
نویسندگان
n.s mohajerani
iran university of science &tech
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :