comparative study of friction stir welding laser beam weldingand TIG welding of pure titanium

سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,357

فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

IIWC01_044

تاریخ نمایه سازی: 6 مهر 1391

چکیده مقاله:

with the increased use of titanium and its alloys in the various industries research and investigation on the joining process of them has become more important than ago . In this paper investigates the comparative macrostructure microstructure and mechanical characteristics of fusion welds laser beam welding LBW tungsten inert gas TIG and solid -state welds friction stir welding FSW of pure titanium microstructures and macrostructures of base metal and welded zones are analyzed by optical microscopy OM. the corresponding mechanical properties are evaluated uniaxial tensile tests. the results of this research shows that however mechanical properties of LBW and TIG are less than FSW on pure Ti.

نویسندگان

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • I. J. Polmear, Light Alloys metallurgy of the light metals, ...
  • ASM Handbook, Properties and selection: nonferrous alloys and special _ ...
  • W.A. Baeslack II. J.R. Davis, C.E. Cross, Selection and weldability ...
  • W.A. Baeslack III, J.M. Gerken, C. Cross, J. Hanson, P.S. ...
  • Handbook, vol. 4, eighth edn, American Welding Society, Miami, Florida, ...
  • R.T. Webster, Welding of titanium alloys, in: ASM Handbook, vol.6, ...
  • edn., ASM International, Metals Park, OH, USA, pp. 783-786, 1993. ...
  • Wiskot Ansel H.W., T. Doumas, Scherrer, U. ...
  • characteristics of commercially pure grade 2 Ti welds and solder ...
  • Qi Yunlian, Deng Ju, Hong Qun, Liying. ...
  • Engineering. A280, 177-181, 2000. Shinosaki. ...
  • Introduction to laser welding in dentistry. Quint Dent Tech. 24 ...
  • Liu J., I. Watanabe, K. Yoshida, M. Atsuta. Joint strength ...
  • Thomas W. M., Nicholas E. D., Watts E. R., Staines ...
  • the _ _ _ Al alloys, Cambridge, UK, 2002. ...
  • R. S Mishra, Z.Y.Ma, "Friction Stir Welding and Processing", university ...
  • V.A. Joshi, "Titanium Alloys", Taylor & Francis Group, New York, ...
  • Yu Zhang , Yutaka S. Sato , Hiroyuki Kokawa, Seung ...
  • K. Kumar and Satish V. Kailas, " The Role of ...
  • نمایش کامل مراجع