the effects testing time and temperature of low vacuum diffusion welding on microstructure and mechanical properties of SiCp/A356Al MMC
محل انتشار: کنگره بین المللی جوش و روشهای اتصال
سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,330
فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IIWC01_004
تاریخ نمایه سازی: 6 مهر 1391
چکیده مقاله:
fusion welding brazing diffusion welding and friction welding could be used to weld the reinforced A1 MMC in fusion welding many problems may occur at the vicinity of welding where particularly at the heat affected zone . During the welding of aluminum an oxide film which covers the surface of A1makes the welding difficult therefore vacuum diffusion bonding process is used for investigating joining characteristics of Sic particulate reinforced aluminum metal matrix composites A356/SICP-MMC metal matrix composites contain 10% SIC PARTICLES THE JOINING PERFORmances of the similar conposites were studied and the influences of testing time and temperature on bonding quality and properties of the bonded joints were also estimated
کلیدواژه ها:
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :