Multiscale modeling of bending behavior of nanotube reinforced polymer composite beams
محل انتشار: دومین کنگره بین المللی علوم و فناوری نانو
سال انتشار: 1387
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 702
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICNN02_385
تاریخ نمایه سازی: 27 شهریور 1391
چکیده مقاله:
In multiscale methods, two or more length scales are considered in formulation of the problem and solved simultaneously to obtain the global response based on local microstructure. These methods can be classified in two categories, namely concurrent and hierarchical. In concurrent multiscale methods, the solution domain is explicitly divided in to certain subdomains in which a proper modeling method is used. But in hierarchical multiscale methods, both scales exist implicitly everywhere in the solution domain. This method is suitable for studying general behavior of the material depending on its microstructure.In this paper, we present a hierarchical multiscale modeling scheme using nonlinear finite element formulation to study the global behavior of nanocomposites. We apply this technique to study the effective bending stiffness of carbon nanotube reinforced polymer nanocomposites. Also, the effective elastic modulus of nanocomposites are determined and compared with the results other similar studies. Varius nanocomposites with different CNT volume fractions are analyzed to study the effect of CNT volume fraction on the global behavior of nanocomposite.In every material point which the constitutive response is needed, a microscale boundary value problem is defined and solved, and then the overall constitutive response is calculated and returned back to the macroscale problem. The micro and macro scale relation is shown in Fig.
نویسندگان
J Ghanbari
Mechanical Engineering Department, Sharif University of Technology, Tehran
R Naghdabadi
Institute for Nano Science and Technology, Sharif University of Technology
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :