Optical Kerr Nonlinear Performance of Metal-Cap Wedged-Shape Hybrid Plasmonic Waveguide
محل انتشار: فصلنامه ادوات مخابراتی، دوره: 12، شماره: 1
سال انتشار: 1401
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 156
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_TDMA-12-1_004
تاریخ نمایه سازی: 28 فروردین 1402
چکیده مقاله:
This paper aims to investigate the enhancement of Kerr nonlinear performance caused by more optical confinement and longer propagation length due to different metal-cap wedge-shaped hybrid plasmonic waveguide geometric parameters. In this work, we will focus on Kerr nonlinear effect, and analyze how the different waveguide geometries can enhance this effect. Our theoretical investigation shows that the presented nonlinear wedge-shaped hybrid plasmonic waveguide structure with a wedge-shaped gap is suitable for photonic integrated circuits based on the hybrid plasmonic passive waveguide, and is a suitable candidate for the photonic devices at nano-scales with nonlinearity. It is also found that the investigated structure can have a longer propagation length of ۲۱۲۰ mm at a ۱۰ nm thick nonlinear dielectric. The minimum effective mode area of the investigated structure is ۰.۰۲۶۳ mm۲ and the maximum nonlinear coefficient is . Also, the confinement factor of the DDMEBT layer is calculated by changing the wedge angle . It is found that the surface mode has a maximum confinement factor of ۰.۳۳ when . The modal and nonlinear properties of the hybrid plasmonic waveguides were analytically determined as well by using the finite element method (FEM). Simulation results show that the wedge-shaped hybrid plasmonic waveguide provides good performance for nonlinear applications such as optical switching at the optical wavelength of .
کلیدواژه ها:
نویسندگان
Hossein Rahimi
Department of Electrical Engineering, , College of Technical, Khomein Branch, Islamic Azad University, Khomein, Iran
Mahmoud Nikoufard
Department of Electronics, Faculty of Electrical and Computer Engineering, University of Kashan, Kashan, Iran
Mojtaba Dehghani Firouzabadi
Department of Electrical Engineering, Arak Branch, Islamic Azad University, Arak, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :