Investigation of Oblique Blast Loading on Trapezoidal Corrugated Core Sandwich Panels; Experimental and Numerical Study
محل انتشار: فصلنامه مکانیک جامد، دوره: 15، شماره: 1
سال انتشار: 1402
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 130
فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JSMA-15-1_008
تاریخ نمایه سازی: 26 فروردین 1402
چکیده مقاله:
In this work dynamic response of trapezoidal corrugated core sandwich panels subjected to oblique blast loading are studied both numerically and experimentally. The stand-off distance which has been determined from sandwich panel to center of the nearest face of the explosive cylinder is considered ۳۰۰ mm. the experiments was performed at Four blast tube with different included angles of ۰°, ۱۵°, ۳۰° and ۴۵° respect to sandwich target plate. The results of numerical simulation, obtained using coupled Eulerian – Lagrangian (CEL) method at ABAQUS/Explicit software. Maximum mid- point deflection of back and front faces are compared with experiment results. The results show that with increasing angle of tilt of explosive the amount of back face deflection at angles of tilt ۱۵°, ۳۰° and ۴۵° respect to the case of ۰°, ۴.۶۸%, ۵.۸۶% and ۹.۷۷% decreases respectively. It is found that at the z direction, deformation profile is completely dome-shaped while the profile in the x direction is almost conical. The achieved results can be used to optimization designing of military vehicles and employed for civil infrastructure.
کلیدواژه ها:
Trapezoidal corrugated core ، Sandwich panels ، Oblique blast loading ، Coupled Eulerian Lagrangian method
نویسندگان
H Mohammadi Hooyeh
Department of Solid Mechanics, Faculty of Mechanical Engineering, University of Eyvanekey, Garmsar, Iran
A Naddaf Oskouei
Department of Solid Mechanics, Faculty of Mechanical Engineering, University of Eyvanekey, Garmsar, Iran
T Mirzababaie Mostofi
Department of Solid Mechanics, Faculty of Mechanical Engineering, University of Eyvanekey, Garmsar, Iran
Kh Vahedi
Department of Solid Mechanics, Faculty of Mechanical Engineering, University of Eyvanekey, Garmsar, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :