Investigation on physical, mechanical, and gunning properties of monolithic low cement alumina-based refractories
سال انتشار: 1401
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 153
فایل این مقاله در 14 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IMES16_072
تاریخ نمایه سازی: 25 اسفند 1401
چکیده مقاله:
In this research, the effect of aluminum silicate and carboxymethyl cellulose adhesives on the propertiesof monolithic alumina-based refractories has been investigated. Also, sodium silicate has been used toimprove the setting time. All samples were fired at three temperatures of ۱۱۰°C, ۱۱۰۰°C and ۱۵۵۰°C.In order to evaluate the desired properties, first the gunning properties of the samples were examined,and then for further investigations cold crushing strength test and the percentage of permanent linearchanges were used. In addition, X-ray diffraction analysis was used to characterize the samples. Theresults of this research showed that the sample containing ۱% aluminum silicate adhesive had theoptimum properties and to reduce the setting time of this sample, in exchange for a slight loss inproperties, ۰.۱% sodium silicate can be used.
کلیدواژه ها:
نویسندگان
Mohammad Mobasheri
MS Student, School of Metallurgy and Materials Engineering, University of Tehran
Ali Mohammad Hadian
Professor, School of Metallurgy and Materials Engineering, University of Tehran
Yasaman Mohammadi
MS Graduate, School of Metallurgy and Materials Engineering, Iran University of Science and Technology