Effects of Phosphite and Phenolic Antioxidants on the Mechanical and Optical Properties of Recycled Polycarbonate

سال انتشار: 1401
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 325

فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

IMES16_036

تاریخ نمایه سازی: 25 اسفند 1401

چکیده مقاله:

Polycarbonate (PC) is an amorphous thermoplastic polymer with robust mechanical propertiesand good transparency. Due to the ever-increasing polycarbonate market, recycling thispolymer is an unavoidable reality. Nevertheless, recycling faces many impediments.Recycling-induced yellowness is one of the most important yet most stubborn phenomenonsduring recycling which negatively affects the optical properties and aesthetics ofpolycarbonate; thus limiting its applications. This research tried to improve the mechanical andoptical properties of polycarbonate recycled from CD by upcycling it. For this purpose, a kindof phosphite antioxidant, Irgafos ۱۶۸, was used, and its effects on the mechanical and opticalproperties of recycled polycarbonate were investigated, alone and with the combination of aphenolic antioxidant (Irganox ۱۰۱۰). According to the results, adding ۲۰۰۰ ppm of Irganox۱۶۸ prior to processing proved to be an effective solution in hindering yellowness while usinga mixture of both antioxidants was also useful. Using Irgafos ۱۶۸ alone and with Irganox ۱۰۱۰reduced Yellowness Index up to ۹۶ and ۸۱%, respectively. Also, the addition of ۲۰۰۰ ppmIrganox ۱۶۸, improves elastic modulus, elongation at break, and impact strength by ۱۹, ۲۸, and۲۸%, respectively. However, mechanical results show that using Irgafos ۱۶۸ in combinationwith Irganox ۱۰۱۰ has adverse effects on mechanical properties.

نویسندگان

Nima Rashidi

Undergraduate student of engineering materials, Department of Materials and Science Engineering, Sharif University of Technology, Tehran, Iran

Rohollah Shamizade

Master student of characterization and selection of engineering materials, Department of Materials and Science Engineering, Sharif University of Technology, Tehran, Iran

Ali Ghasem-Khani

Master student of metal forming of the engineering materials, Department of Materials and Science Engineering, Sharif University of Technology, Tehran, Iran

Gholamreza Pircheraghi

Associate Professor, Department of Materials and Science Engineering, Sharif University of Technology, Tehran, Iran