Dissimilar brazing of cemented carbide to steel using a pure copper asfiller metal
سال انتشار: 1401
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 226
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
INCWI23_002
تاریخ نمایه سازی: 16 اسفند 1401
چکیده مقاله:
Due to the higher production cost of the monolithic cemented carbide tools as wellas their brittle nature, these cemented carbides such as WC-Co are usually joined to a steel.This research investigates the use of pure copper as an interlayer to dissimilar braze the WC-۸Wt.%Co cermet to AISI ۴۱۴۰ steel. The results indicate the formation of a Cu-Fe-Co reactionlayer at the joint interface in addition to the formation of precipitates in the joint area. Also themicro hardness measurements indicated considerably higher values near the both interfaces incompared with the copper interlayer zone. The shear strength for the produced joint obtained۱۳۸ MPa, which is an appropriate strength for the WC-Co/steel dissimilar brazed joints.However, using other joining strategy or filler materials via prevention the formation of cobaltdepletion zone in joint area can enhance the joint strength.
کلیدواژه ها:
نویسندگان
Farzad Habibi Azarivash
Ph.D. candidate in Materials Engineering, Sahand University of Technology, IRAN
Mohamad Nouri Menbar
Master of Science student in Materials Engineering, Sahand University of Technology,IRAN
Ahad Samadi
Associate professor of Materials Engineering, Sahand University of Technology, IRAN