سیویلیکا را در شبکه های اجتماعی دنبال نمایید.

Effect of Welding Parameters in the Microstructure and Mechanical Properties of Friction-Welded Joints of 100Cr6 Steel

سال انتشار: 1398
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 192

فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_IJMSEI-16-3_003

تاریخ نمایه سازی: 30 بهمن 1401

چکیده مقاله Effect of Welding Parameters in the Microstructure and Mechanical Properties of Friction-Welded Joints of 100Cr6 Steel

In this study, high-carbon, chromium alloy steel (100Cr6) having the initial spheroidized microstructure was welded using the rotary friction welding method. The effects of process parameters such as friction time and friction force were experimentally investigated. The friction welded joints were produced of two 100Cr6 steel rods. In order to examine the microstructure and mechanical properties of the friction welded 100cr6 steel joints, tensile and hardness tests were conducted. The microstructure of weld zone was examined by optical microscopy. It was found that after cooling, martensitic structure is obtained at the core and periphery of the weld joint. It was found that the tensile strength of friction welded samples is increased with increasing time and force of friction up to a certain level and then decreases again. Hardness measurements show a higher hardness at the centre of the weld joint in comparison with its periphery.

کلیدواژه های Effect of Welding Parameters in the Microstructure and Mechanical Properties of Friction-Welded Joints of 100Cr6 Steel:

نویسندگان مقاله Effect of Welding Parameters in the Microstructure and Mechanical Properties of Friction-Welded Joints of 100Cr6 Steel

M. Demouche

Institut d'optique et mecanique de precision -UFA setif - Algerie

E. H. Ouakdi

Institut d'optique et mecanique de precision -UFA setif - Algerie

R. Louahdi

Institut d'optique et mecanique de precision -UFA setif - Algerie

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
Bhadeshia, H.K.D.H., Steels for bearings. Prog. Mat. Sci., ۲۰۱۲, ۵۷, ...
Madhusudhan, R.G. and Venkata, R. P. Role of nickel as ...
welding of maraging steel to low alloy steel. J. Mat. ...
Mumin, S., Erol Akata , H. and Turgut G., Characterization ...
parts welded by friction welding. Materials Characterization, ۲۰۰۷, ۵۸, ۱۰۳۳-۱۰۳۸ ...
Selvamani, S.T.and Palanikumar, K., Optimizing the friction welding parameters to ...
tensile strength in AISI ۱۰۳۵ grade carbon steel rods. Measurement, ...
Selvamani , S.T., Palanikumar , K. , Umanath , K. ...
parameters on the mechanical metallurgical and chemical properties of AISI ...
Materials and Design, ۲۰۱۵,۶۵, ۶۵۲-۶۶۱ ...
Berna, B., Armagan Arici , A. and Muharrem, Y., Optimization ...
weld steel tube to forging joints . Materials and Design, ...
Radosław, W., Effect of friction welding parameters on the tensile ...
properties of dissimilar AISI ۱۰۲۰-ASTM A۵۳۶ joints. Int. J. Adv. ...
Mehmet, U., Bekir Sadik,U. and Mustafa A., Determination of optimum ...
connecting high alloyed X۵۳CrMnNiN۲۱۹ and X۴۵CrSi۹۳ steels by friction welding. ...
Mitelea, I., Victor, B. and Corneliu, C., Dissimilar friction welding ...
Azizieh, M., Khamisi, M., Lee, D. J., Yoon, E. Y. ...
friction welding of ST۳۷ and CK۶۰ steels. Int. J. Adv. ...
Radovan C., Svetislav C., Karlo T. R. , Rebeka, R. ...
M¨umin, S., Joining with friction welding of high-speed steel and ...
Gharibshahiyan, E. and Honarbakhsh, R. A., Finite element simulation of ...
Goodarzi , M., Boutorabi , S. M. A. and Safarkhanian, ...
Alvand, M., Naseri, M., Borhani, E. and Abdollah-Pour, H., Microstructure ...
Zamani , M. H., Divandari , M. and Tamizifar, M., ...
Tehrani - Moghadam, H.G., Jafarian, H.R., Salehi, M.T. and Eivani, ...
Saman, K., Hamid, R.J. , Ali, R. E. and Shahram, ...
نمایش کامل مراجع