Preparation and Characterization of Nanostructured Titania-coated Silica Microsphere Membranes with Simultaneous Photo-catalytic and Separation Applications for Water Treatment
محل انتشار: مجله علم مواد و مهندسی ایران، دوره: 17، شماره: 1
سال انتشار: 1398
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 244
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJMSEI-17-1_004
تاریخ نمایه سازی: 1 اسفند 1401
چکیده مقاله:
In this research, the nanostructured titania-coated silica microsphere (NTCSM) membrane consisting of titania-silica core-shell particles on α–alumina substrate was prepared by dip-coating method. The silica microspheres were synthesized by the Stöber method, and the nanostructured titania shell was obtained from a polymeric sol. Then, the prepared core-shell particles were deposited on alumina substrates. The samples were characterized by DLS, TG-DTA, XRD, FTIR and SEM. The photo-catalytic activity of the NTCSM membranes was evaluated using photo-degradation of methyl orange solution by UV–visible spectrophotometer. Also, physical separation capability was investigated by filtration experiment based on methyl orange removal from aqueous solution using a membrane setup. The mean particle size distribution of silica microspheres was determined to be about ۶۵۰ nm that by deposition of titania nano-particles increased up to about ۸۰۰ nm. After ۶۰ min UV-irradiation, the dye removal efficiency was determined to be ۸۰% by the membrane. By coupling separation process with photo-catalytic technique, the removal efficiency was improved up to ۹۷%. Thus, the NTCSM membranes showed simultaneous photo-degradation and separation capabilities for dye removal from water.
کلیدواژه ها:
نویسندگان
V. Tajer Kajinebaf
Department of Materials Engineering, Takestan Branch, Islamic Azad University, Takestan, Iran
M. Zarrin Khame-Forosh
School of Metallurgy and Materials Engineering, Iran University of Science & Technology, Tehran, Iran
H. Sarpoolaky
School of Metallurgy and Materials Engineering, Iran University of Science & Technology, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :