Noninvasive Condition Assessment of CircuitBreaker Contact Based on Voltage Measurement
محل انتشار: دهمین کنفرانس حفاظت و کنترل سیستم های قدرت
سال انتشار: 1394
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 174
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
PSPC10_017
تاریخ نمایه سازی: 20 بهمن 1401
چکیده مقاله:
Circuit breaker (CB) as the critical part of theprotection system, is used to isolate power system during faults.Electric power system blackouts and equipment damage mayoccur if a CB fails to operate due to failure in its interruptionchamber. Arc contacts are the most important part of theinterruption chamber therefore, condition assessment of theseparts are necessary. In this paper, a noninvasive method has beenproposed to measure the length of the arc contacts throughmonitoring of the delay in the drop voltage rise across the CBterminals during opening process. The proposed method hasbeen verified through experiments conducted on a real SF۶ CB.
کلیدواژه ها:
نویسندگان
Sadegh Rahimi
University of Tehran
Asghar Bagherpour
University of Tehran
Ali Asghar Razi-Kazemi
K. N. Toosi University ofTechnology
Kaveh Niayesh
Norwegian University of Science andTechnology (NTNU)