Experimental-Modeling Evaluation Between Hydraulic and Electrical Variables Using Copulas and Spectral Analysis for a Centrifugal Pump
سال انتشار: 1402
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 502
فایل این مقاله در 18 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JAFM-16-4_005
تاریخ نمایه سازی: 19 بهمن 1401
چکیده مقاله:
Centrifugal pumps are turbomachines that have wide industrial applications and could perform in different ways such as pump and turbine mode. The maintenance of this equipment is mostly carried out using invasive methods that are expensive, time-consuming, and even complicated. The application of non-invasive methods is sought since they offer the advantage of real-time monitoring without stopping the process, reducing component assembly and disassembly times and providing a faster response. The aim of this work is done an experimental investigation that shows evidence about how the information on the hydraulic variables can be obtained if the electrical variables are monitored for the modes of operation such as pump and turbine. This work is divided into two parts, the first part is based on a statistical analysis to perform a multivariate adjustment through copulas and probability distributions. The second part focuses on the graphical analysis of the power density spectra for the hydraulic variables, the torque, and the defined electrical variables. The amplitude peaks of each variable and which peaks are common between them are determined. A statistically significant fit for Tawn type ۲ copula is obtained with the indicator variable of pressure fluctuation and a multivariate transformation of the three-phase network currents. In the spectra analysis, common amplitude peaks are observed between the spectra that indicate the information flow on the phenomena between the hydraulic variables and the electrical variables.
کلیدواژه ها:
نویسندگان
V. O. Monsalve
Applied Mechanics Research, Group, Mechanical Engineering Department, Universidad EAFIT, Medellín ۰۵۰۰۲۲, Colombia
F. Botero
Applied Mechanics Research, Group, Mechanical Engineering Department, Universidad EAFIT, Medellín ۰۵۰۰۲۲, Colombia
L. F. Cardona
Pulp and Paper Research Group, Faculty of Chemical Engineering, Universidad Pontificia Bolivariana, Medellín ۵۶۰۰۶, Colombia
V. J. Pugliese
Department of Mechanical Engineering, Universidad del Norte, Barranquilla ۰۸۱۰۰۱, Colombia
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :