Cutting tools properties, materials, and coating
محل انتشار: ششمین همایش بین المللی مهندسی سازه
سال انتشار: 1401
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 118
فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISSEE06_027
تاریخ نمایه سازی: 16 بهمن 1401
چکیده مقاله:
Increasing the cutting speed and quality has attended a lot of interest within the last century. One of the most significant current discussions in this field is the removal of the cooling system, monitoring the cutting parameter, and selecting the best materials for cutting tool production. Previous studies have based their criteria for selection on the choice of the foremost materials to be more efficient in the cutting process. Another aim of this study is to declare the cutting tool applications. The last part of the study set out to review the available information on the cutting tools materials. Accordingly, in this study, in the first step, the properties that the cutting tool should have and its applications were introduced. In the following, the materials that can be used for the production of cutting tools were identified, and finally, the research conducted to improve the properties of these materials was discussed.
کلیدواژه ها:
نویسندگان
Seyed Vahid Alavi Nezhad Khalil Abad
Assistant professor, Department of civil engineering. Birjand university of technology, Birjand, Iran
Razieh Khoshhal
Assistant professor, Department of materials engineering. Birjand university of technology, Birjand, Iran