Development of new comprehensive relations to assess rock fragmentation by blasting for different open pit mines using GEP algorithm and MLR procedure
سال انتشار: 1401
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 258
فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJMGE-56-4_011
تاریخ نمایه سازی: 21 دی 1401
چکیده مقاله:
The fragment size of blasted rocks considerably affects the mining costs and production efficiency. The larger amount of blasthole diameter (ϕh) indicates the larger blasting pattern parameters, such as spacing (S), burden (B), stemming (St), charge length (Le), bench height (K), and the larger the fragment size. In this study, the influence of blasthole diameter, blastability index (BI), and powder factor (q) on the fragment size were investigated. First, the relation between each of X۲۰, X۵۰, and X۸۰ with BI, ϕh, and q as the main critical parameters were analyzed by Table curve v.۵.۰ software to find better input variables with linear and nonlinear forms. Then, the results were analyzed by multivariable linear regression (MLR) procedure using SPSS v.۲۵ software and gene expression programming (GEP) algorithm for prepared datasets of four open-pit mines in Iran. Relations between each of X۲۰, X۵۰, and X۸۰ with the combination of adjusted BI, ϕh, and q were obtained by MLR procedure with good correlations of determination (R۲) and less root mean square error (RMSE) values of (۰.۸۱۱, ۱.۴ cm), (۰.۸۷۴, ۲.۵ cm) and (۰.۸۳۲, ۵.۴ cm) respectively. Moreover, new models were developed to predict X۲۰, X۵۰, and X۸۰ by the GEP algorithm with better correlations of R۲ and RMSE values (۰.۸۶۰, ۱.۳ cm), (۰.۹۱۳, ۲.۴۹ cm), and (۰.۸۸۵, ۵.۶ cm) respectively and good agreement with actual field results. The developed GEP models can be used as new relations to estimate the fragment sizes of blasted rocks.
کلیدواژه ها:
نویسندگان
Hassan Moomivand
Department of Mining Engineering, Faculty of Engineering, University of Urmia, Urmia, Iran.
Hasel Amini Khoshalan
Department of Mining Engineering, Faculty of Engineering, University of Kurdistan, Sanandaj, Iran.
Jamshid Shakeri
Department of Mining Engineering, Faculty of Engineering, University of Kurdistan, Sanandaj, Iran.
Hassan Vandyousefi
Department of Mining Engineering, Faculty of Engineering, University of Urmia, Urmia, Iran.
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :