On the Design and Optimization of a Switched-Capacitor Interface Circuit for MEMS Capacitive Sensors
محل انتشار: بیستمین کنفرانس مهندسی برق ایران
سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,076
فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICEE20_563
تاریخ نمایه سازی: 14 مرداد 1391
چکیده مقاله:
In this paper a switched-capacitor (SC) interface circuit that is intended for MEMS capacitive sensors is proposed and designed. In the proposed architecture, both correlated doublesampling (CDS) and chopper stabilization (CHS) noise reduction techniques are applied to the interface circuit to reduce theamplifier offset and low frequency noise. The effects of parasitic capacitances between the sensor and its interface circuit which are usually larger than the sense capacitances are carefullyanalyzed and used to optimize the readout performance. In other words, by analyzing the circuit offset and noise performance inpresence of these parasitic capacitances, the suitable values of the circuit parameters such as sampling frequency, choppingfrequency, and amplifier unity gain bandwidth are calculated. In comparison to the circuit using only CDS or CHS technique, the resolution variation of the proposed readout circuit is less than 1aF in presence of parasitic capacitances varying up to 20 pF
کلیدواژه ها:
نویسندگان
Najme Ebrahimi Seraji
Integrated Circuits Design Laboratory, Department of Electrical Engineering, Amirkabir University of Technology