Numerical Modeling of Fluid’s Aeration: Analysis of the Power Losses and Lubricant Distribution in Gearboxes
سال انتشار: 1402
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 132
فایل این مقاله در 12 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JACM-9-1_007
تاریخ نمایه سازی: 17 مهر 1401
چکیده مقاله:
Aeration determines the entrainment of air in another fluid. In geared transmissions, this process affects the operating temperature of the mechanical system because the air’s bubbles trapped in the lubricant act as an insulator. Lubricant’s aeration occurs mainly because the gears’ teeth entering the oil sump and the oil impacting on free surface. Being able to numerically model aeration is fundamental to better describe the physics and the lubrication mechanisms which affect the behavior of the system. In this paper, a new solver that includes the aeration phenomenon was implemented in the opensource environment OpenFOAM®. The simulations’ results were validated with torque measurements. Moreover, a comparison of the oil distribution between a standard multiphase- and the new aeration-solver is provided.
کلیدواژه ها:
نویسندگان
Marco Mastrone
Faculty of Science and Technology, Free University of Bolzano, Piazza Università ۱, Bolzano (BZ), ۳۹۱۰۰, Italy
Franco Concli
Faculty of Science and Technology, Free University of Bolzano, Piazza Università ۱, Bolzano (BZ), ۳۹۱۰۰, Italy
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :