Numerical and Experimental Investigation on Post-buckling Behavior of Stiffened Cylindrical Shells with Cutout subject to Uniform Axial Compression
سال انتشار: 1402
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 116
فایل این مقاله در 20 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JACM-9-1_003
تاریخ نمایه سازی: 17 مهر 1401
چکیده مقاله:
In this paper, post buckling behavior of thin steel and aluminum cylindrical shells with rectangular cutouts under axial loading was studied experimentally and also using the finite element method. Riks method is used for analyzing the cylindrical shells. The effect of longitudinal and circumferential stiffeners (ribs and stringer) was studied on the buckling load and the post buckling behavior as the stiffeners used individually and in combination with each other. It was shown that by adding stringer, the buckling load improves and the rib has a positive effect on the post buckling behavior of the structure. Some tests were performed by ZwickRoell tensile/compression testing machine and it was carried out for both types of steel and aluminum shells with and without stiffeners. Comparing the experimental results with the FEA results shows good agreement. Nonlinear analysis of cylindrical steel and aluminum shells with cutout have demonstrated that, in some cases, a local buckling called snap-back can be seen in the load-displacement path. Snap-back which is a decrease in the amount of both load and displacement indicates this local buckling. This phenomenon is because of appearing mode shapes sequentially during the numerical buckling analysis of shells. Although these local buckling happened, the structure is still endured the higher loads.
کلیدواژه ها:
نویسندگان
Amir Shahani
Department of Applied Mechanics, Faculty of Mechanical Engineering, K.N. Toosi University of Technology, ۱۹۳۹۵-۱۹۹۹, Tehran, Iran
Faraz Kiarasi
Department of Applied Mechanics, Faculty of Mechanical Engineering, K.N. Toosi University of Technology, ۱۹۳۹۵-۱۹۹۹, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :