Numerical Studies of Multiphase Flow in Structured Packings
محل انتشار: بیستمین کنفرانس سالانه مهندسی مکانیک
سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,012
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISME20_330
تاریخ نمایه سازی: 18 تیر 1391
چکیده مقاله:
A volume of fluid multiphase flow model was used to investigate effective area and created liquid film in the structured packings. The computational results showed that the gas and liquid flow rates play significant roles on the effective interfacial area of the packing. In particular, the effective area increases as the flow rates of both phases increase. Numerical results were compared with the Brunazzi model, and a goodagreement was found. Attention was given to the process of liquid film formation in both 2D and 3D models. Current study revealed that CFD can be used as an effective tool to provide information on the details of gas and liquid flows in complex packing geometries.
کلیدواژه ها:
نویسندگان
Saeed Shojaee
Department of Chemical Engineering, University of Sistan and Baluchestan
Seyyed Hossein Hosseini
Department of Chemical Engineering, University of Ilam
Gudarz Ahmadi
Department of Mechanical and Aeronautical Engineering, Clarkson University