Axisymmetric Magnetohydrodynamic Squeezing flow of Nanofluid in Porous Media under the influence of Slip Boundary Condition

سال انتشار: 1397
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 172

فایل این مقاله در 13 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_CHAL-6-2_006

تاریخ نمایه سازی: 31 تیر 1401

چکیده مقاله:

The various industrial, biological and engineering applications of flow of squeezing flow of fluid between parallel plates have been the impetus for the continued interest and generation renewed interests on the subject. As a part of the renewed interests, this paper presents the study of axisymmetric magnetohydrodynamic squeezing flow of nanofluid in porous media under the influence of slip boundary condition using differential transformation method. Good agreements are established when the results of the differential transformation method are compared with the results of numerical method Runge-Kutta coupled with shooting method. Also, the analytical solution is used to investigate the effects of porous medium, magnetic field and slip boundary on the steady two-dimensional axisymmetric flow of the nanofluid. It is shown from the results that the velocity of the fluid increases as the magnetic field and porous parameters increase under slip condition while the velocity of the fluid decreases with increase in the magnetic field and porous parameter under no slip condition. By increasing the slip parameter, the velocity of the fluid increases while the velocity of the fluid decreases as the Reynolds number increases. Studies on nanofluidics such as energy conservation, friction reduction and micro mixing biological samples can be enhanced and better understood by the insights given in this present study.

نویسندگان

Gbeminiyi Sobamowo

Department of Mechanical Engineering, University of Lagos, Akoka, Nigeria

Lawrence Jayesimi

Department of Works and Physical Planning, University of Lagos, Nigeria

Akindoye Waheed

Department of Mechanical Engineering, Federal University of Agriculture, Abeokuta, Nigeria.