Cavity Growth in Underground Coal Gasification Method by Considering Cleat Length and Inclination of Coal with Elasto-Brittle Behavior

سال انتشار: 1401
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 161

فایل این مقاله در 19 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_JMAE-13-2_018

تاریخ نمایه سازی: 29 تیر 1401

چکیده مقاله:

The in-situ coal is converted to the synthetic gas in the process of underground coal gasification (UCG).  In order to increase the rate of in-situ coal combustion in the UCG process, the contact surfaces between the steam, heat, and coal fractures should be raised. Therefore, the number of secondary cracks should be increased by raising the heat and existing steam pressure during the process. This paper emphasises on the secondary crack growth mechanism of the pre-existing cracks in the coal samples under different loading conditions. Different geometric specifications such as the length of the pre-existing cracks (coal cleats) and their inclinations are considered. The numerical modeling results elucidate that the first crack growths are the wing cracks (also called the primary or tensile cracks) formed due to unbonding the tensile bonds between the particles in the assembly. Ultimately, these cracks may lead to the cleat coalescences. On the other hand, the secondary or shear cracks in the form of co-planar and oblique cracks may also be produced during the process of crack growth in the assembly. These cracks are formed due to the shear forces induced between the particles as the initial cleat length is increased and exceed the dimension of coal blocks. The cavity growth rate increases as the secondary cracks grow faster in the coal blocks. In order to achieve the optimum conditions, it is also observed that the best inclination angle of the initial coal cleat changes between ۳۰ to ۴۵ degrees with respect to the horizon for the coal samples with the elasto-brittle behavior.

کلیدواژه ها:

UCG method ، cavity growth rate ، Crack Propagation ، cleat length and inclination ، parallel bonded particle model

نویسندگان

M.R. Shahbazi

Department of Mining and Metallurgical Engineering, Yazd University, Yazd, Iran

M. Najafi

Department of Mining and Metallurgical Engineering, Yazd University, Yazd, Iran

M. Fatehi Marji

Department of Mining and Metallurgical Engineering, Yazd University, Yazd, Iran

A. Abdollahipour

School of Mining Engineering, College of Engineering, University of Tehran, Tehran, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Couch, G.R. (۲۰۰۹). Underground Coal Gasification. London, UK: IEA Clean ...
  • Saulov, D.N., Ovid, A.P. and Klimenko, A.Y. (۲۰۱۰). Flame propagation ...
  • Blinderman, M.S., Saulov, D.N., and Klimenko, A.Y. (۲۰۰۸). Forward and ...
  • Su, F., Itakura, K., Deguchi, G. and Ohga, K. (۲۰۱۶). ...
  • Javed, S.B., Uppal, A.A., Bhatti, A.I., and Samar, R. (۲۰۱۹). ...
  • Gao, W., Zagorscak, R. and Thomas, H, R. (۲۰۲۱). Insights ...
  • Shahbazi, M., Najafi, M. and Marji, M.F. (۲۰۱۸). On the ...
  • Marji, M.F. (۱۹۹۷). Modelling of cracks in rock fragmentation with ...
  • Haeri, H., Sarfarazi, V., Ebneabbasi, P., Shahbazian, A. and Marji, ...
  • Haeri, H., Sarfarazi, V., Zhu, Z., Marji, M.F. and Masoumi, ...
  • A boundary element analysis of crack-propagation mechanism of micro-cracks in rock-like specimens under a uniform normal tension [مقاله ژورنالی]
  • Sarfarazi, V., Haeri, H., Marji, M.F. and Zhu, Z. (۲۰۱۷). ...
  • Zhao, Y.X., Zhao, G.F. and Jiang, Y.D. (۲۰۱۳). Experimental and ...
  • Xiangchun, L., Chao, W., Caihong, Z. and Hua, Y. (۲۰۱۲). ...
  • Wang, C., Zhang, C., Li, T. and Zheng, C. (۲۰۱۹). ...
  • Wu, P.F., Liang, W.G., Li, Z.G., Cao, M.T. and Yang, ...
  • Li, L., Yan, S., Liu, Q. and Yu, L. (۲۰۱۸). ...
  • Yin, G.Z., Gao, D.F. and Pi, W.L. (۲۰۰۳). CT real-time ...
  • Zhang, X.P. and Wong, L.N.Y. (۲۰۱۲). Crack Initiation, Propagation and ...
  • Xie, Y., Cao, P., Liu, J. and Dong, L. (۲۰۱۶). ...
  • Yue, Z., Peng, L., Yue, X., Wang, J. and Lu ...
  • Lin, Q., Cao, P., Wen, G., Meng, J., Cao, R. ...
  • Sharafisafa, M. and Nazem, M. (۲۰۱۴). Application of the distinct ...
  • Marji, F.M. (۲۰۱۴). Numerical analysis of quasi-static crack branching in ...
  • Reyes, O. and Einstein, H.H. (۱۹۹۱). Failure mechanism of fractured ...
  • Vaughan, H. (۱۹۹۸). Crack propagation and the principle-tensile-stress criterion for ...
  • Shen, B. and Stephansson, O. (۱۹۹۴). Modification of the G-criterion ...
  • Bakhshi, E., Rasouli, V., Ghorbani, A., Marji, F.M., Damjanac, B. ...
  • Discrete element modeling of explosion-induced fracture extension in jointed rock masses [مقاله ژورنالی]
  • Itasca consulting group, Inc. PFC ۲D Version ۶.۰۰. (www.itascacg.com) ...
  • Zhang, B., Bicanic, N., Pearce, C.J. and Phillips, D.V. (۲۰۰۲). ...
  • نمایش کامل مراجع