Evaluating Microscale Failure Response of Various Weathering Grade Sandstones Based on Micro-Scale Observation and Micro-Structural Modelling Subjected to Wet and Dry Cycles
محل انتشار: مجله معدن و محیط زیست، دوره: 13، شماره: 2
سال انتشار: 1401
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 122
فایل این مقاله در 15 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JMAE-13-2_002
تاریخ نمایه سازی: 29 تیر 1401
چکیده مقاله:
The significance of rock failure can be found from the fact that microfracture genesis and coalescence in the rock mass results in macroscale fractures. Rock may fail due to an increase in the local stress, natural fractures, weathering inducing micro-crack genesis, coalescence, and propagation. Therefore, a comprehensive understanding of the micro-scale failure mechanism of various weathering grade sandstones based on micro-level observation and microstructure-based simulation is essential. The microscale failure response of various weathering grade sandstones is studied under the wet and dry cycles. Each sample is tested for the micro-structure and micro-fracture characteristics using the image analysis. Furthermore, the micrographs obtained are also used to create the microstructure-based models, which are then simulated in the ANSYS software. The findings indicate that the moderately weathered sandstones indicate less weight reduction than the slightly weathered sandstone. The results obtained also demonstrate that the wet and dry cycles have little effect on the particle shape and size. However, variation in the particle shape and size implies that this is a result of the prevailing interaction of rock and water particle. The microscale simulation reveal that both UCS and BTS decrease from ۳۷ MPa to ۱۹ MPa and ۹ MPa to ۴ MPa as the density of the micro-structure increases. The results reveal that the primary fracture deviation from the loading axis increases with increasing density in the micro-structural micro-structures, although this effect reduces with further increasing density in the micro-structures.
کلیدواژه ها:
نویسندگان
Kausar Sultan shah
School of Material and Mineral Resources Engineering, Universiti Sains Malaysia, ۱۴۳۰۰, Nibong Tebal, Pulau, Malaysia
Mohd Hazizan Mohd Hashim
School of material and mineral resources engineering, USM, Malaysia
Hafeez Rehman
Department of Mining Engineering, Balochistan University of Information Technology, Engineering and Management Sciences, Quetta, Pakistan.
Kamar shah Ariffin
school of material and mineral resources engineering, USM, Malaysia
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :