An investigation on friction coefficients between multi-body bell-end circular thin-walled tubes

سال انتشار: 1401
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 356

فایل این مقاله در 14 صفحه با فرمت PDF و WORD قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

IEAMCONF02_024

تاریخ نمایه سازی: 15 تیر 1401

چکیده مقاله:

In this paper, the effects of different friction coefficients used as general contact in ABAQUS/Explicit for novel multi-body circular tubes, which are called bell-end circular tubes, is investigated. For this purpose, a Python script was written to apply the friction coefficients from ۰.۰۹ to ۰.۶ in the finite element simulation of double and triple bell-end tubes. The force-displacement results are then transferred to MATLAB in order to calculate the Absorbed Energy, Peak Crush Force, Average Crush Force, Crush Force Efficiency, and Specific Absorbed Energy. The results depict a decrease in Crush Force Efficiency and an increase in the mentioned calculated crashworthiness characteristics by increasing the friction coefficient value. Furthermore, two deformed shapes of double and triple bell-end tubes were observed. The first deformation happens with lower values of friction coefficient in which the tubes enter and expand one another and then crushing happens, and the second one happens with the higher values in which crushing of the lower and upper part of the tubes happens between the entering and expanding mode of deformation.

نویسندگان

Pouya Azarandaz

Shahid Bahonar University of Kerman

Amirhosein Mozafari

Shahid Bahonar University of Kerman

Hossein Raiszade

Shahid Bahonar University of Kerman