Effect of Contact Angle Hysteresis on Evaporation Dynamics of a Sessile Drop on a Heated Surface
سال انتشار: 1401
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 197
فایل این مقاله در 16 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JAFM-15-5_006
تاریخ نمایه سازی: 13 تیر 1401
چکیده مقاله:
Contact angle hysteresis (CAH) is a significant factor affecting the drop motion on solid substrates. A model of CAH is introduced to explore the influence of CAH on the dynamics of a sessile drop on a uniformly heated surface, and a two-dimensional evolution equation of the drop thickness is established using the lubrication approximation and Navier slip boundary conditions. A numerical simulation is performed to examine the dynamic behaviors of an evaporating drop, and the drop profile, contact angle, contact line, and moving speed are investigated. Simulated results indicate that the drop evolution process involves drop spreading, pinning, and depinning of the contact line. In the drop spreading stage, when the hysteresis angle increases, the spreading period is shortened, and the spreading radius and spreading speed are reduced; in contrast, the pinning period is raised, and the mass of the drop is apparently reduced with increasing hysteresis angle. In the depinning stage, the CAH declines the contact angle, and a flatter pattern is evolved, thereby improving the heat transfer performance, promoting drop evaporation, and shortening the depinning time. The presence of CAH can speed up the drying of the drop, and the large hysteresis angle leads to faster evaporation. Regulating the CAH is an effective way to manipulate the motion of the contact line for an evaporating drop.
کلیدواژه ها:
نویسندگان
X. M. Ye
Hebei Key Laboratory of Low Carbon and High Efficiency Power Generation Technology, North China Electric Power University, Baoding ۰۷۱۰۰۳, China
N. K. Zhang
Hebei Key Laboratory of Low Carbon and High Efficiency Power Generation Technology, North China Electric Power University, Baoding ۰۷۱۰۰۳, China
R. Cheng
Patent Examination Cooperation (Tianjin) Center of the Patent Office, CNIPA, Tianjin ۳۰۰۳۰۴, China
C. X. Li
Hebei Key Laboratory of Low Carbon and High Efficiency Power Generation Technology, North China Electric Power University, Baoding ۰۷۱۰۰۳, China
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :