Thermal-hydraulic analysis of a dry storage cask for VVER-۱۰۰۰ spent nuclear fuel
محل انتشار: فصلنامه فیزیک و مهندسی پرتو، دوره: 3، شماره: 3
سال انتشار: 1401
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 223
فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_RPE-3-3_005
تاریخ نمایه سازی: 5 تیر 1401
چکیده مقاله:
In this study, thermal-hydraulic analysis of a dry storage cask for Bushehr Nuclear Power Plant spent nuclear fuels is carried out. Geometry drawing and mesh generation were completed in SolidWorks and Gambit software, respectively. Three different cases were considered for the cask geometry and design including cask with/without spacers and cask with spacers and fins. Thermal-hydraulic analysis of the cask was performed for steady-state and normal storage conditions in ANSYS CFX solver package. Simulation results indicated a weak thermal-hydraulic behavior of the cask in the geometry without spacer and maximum fuel temperature exceeded the allowable safety limits. However, with the addition of spacers and fins in the geometry of the cask, thermal behavior of the cask was significantly improved and maximum fuel temperature achieved a proper margin compared to the allowable safety limits. As a result, the spent fuel integrity will be maintained in the normal storage conditions. The simulation results were compared with a literature published paper and it showed a good agreement between the calculated results.
کلیدواژه ها:
Dry Storage Cask ، thermal-hydraulic analysis ، Computational Fluid Dynamics ، Spent Nuclear Fuel ، Bushehr Nuclear Power Plant
نویسندگان
Mohammad Ali Hejazi
Department of Energy Engineering, Sharif University of Technology, P.O. Box: ۱۱۱۵۵-۱۶۳۹, Tehran, Iran
Seyed Khalil Mousavian
Reactor and Nuclear Safety Research School, Nuclear Science and Technology Research Institute, P.O. Box: ۱۴۳۹۹-۵۵۹۳۳, Tehran, Iran
Mohammad Outokesh
Department of Energy Engineering, Sharif University of Technology, P.O. Box: ۱۱۱۵۵-۱۶۳۹, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :