Effects of Equal Channel Angular Pressing (ECAP) Process with an Additional Expansion-Extrusion Stage on Microstructure and Mechanical Properties of Mg–۹Al–۱Zn

سال انتشار: 1400
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 241

فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_JMATPR-9-4_005

تاریخ نمایه سازی: 4 تیر 1401

چکیده مقاله:

In this study, equal channel angular pressing (ECAP) process with an additional expansion-extrusion stage named expansion-extrusion equal channel angular pressing (EECAP) process is utilized for producing bulk ultrafine grained (UFG) Mg–۹Al–۱Zn magnesium alloy. In this process, cyclic expansion-extrusion (CEE) and equal channel angular pressing (ECAP) processes are combined. AZ۹۱ magnesium alloy was used for this experiment. An FEM simulation was performed to calculate the compressive hydrostatical stress. Furthermore, microstructural and mechanical properties were investigated. The experimental findings revealed that the ductility of the sample remains almost constant (۰.۰۳% drop) while ultimate tensile strength increased about ۳۰%. The average value of microhardness improved from ۴۸ Hv to ۶۵ Hv (۳۵%) and grain size refined from ۱۴۴ µm to ۳.۴ µm. Despite the expansion part of the die, there is no need for back pressure. Another advantage of this new method is maintaining ductility while strengthening.

نویسندگان

Mahnoush Rassa

Department of Mechanical Engineering, College of Engineering, University of Tehran, Tehran, Iran

Geonik Azadkoli

Department of Mechanical Engineering, College of Engineering, University of Tehran, Tehran, Iran

Mohammad Eftekhari

Department of Mechanical Engineering, College of Engineering, University of Tehran, Tehran, Iran

Ali Fata

Department of Mechanical Engineering, Faculty of Engineering, University of Hormozgan, Bandar Abbas, Iran

Ghader Faraji

Department of Mechanical Engineering, College of Engineering, University of Tehran, Tehran, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • ReferencesXu, S., et al., Dynamic microstructural changes in Mg–۹Al–۱Zn alloy ...
  • Pardis, N., et al., Cyclic expansion-extrusion (CEE): A modified counterpart ...
  • Celotto, S. and T. Bastow, Study of precipitation in aged ...
  • Bursšík, J. and M. Svoboda, A HREM and analytical STEM ...
  • Braszczyńska-Malik, K., Spherical shape of γ-Mg ۱۷ Al ۱۲ precipitates ...
  • Faraji, G., M. Mashhadi, and H. Kim, Microstructure inhomogeneity in ...
  • Siahsarani, A., et al., Microstructural, Mechanical and Corrosion Properties of ...
  • Li, Y., et al., Achieving single-pass high-reduction rolling and enhanced ...
  • Xu, Q., et al., Microstructure evolution of AZ۹۱ alloy processed ...
  • Fata, A., et al., Evaluation of Hot Tensile Behavior of ...
  • Cubides, Y., et al., Enhanced mechanical properties and corrosion resistance ...
  • Cubides, Y., et al., Effects of dynamic recrystallization and strain-induced ...
  • Abdolvand, H., et al., Microstructure and mechanical properties of fine-grained ...
  • Ensafi, M., G. Faraji, and H. Abdolvand, Cyclic extrusion compression ...
  • Chung, C., et al. Effect of ECAP on microstructure and ...
  • Jamali, S., G. Faraji, and K. Abrinia, Evaluation of mechanical ...
  • Wang X, Wu M, Ma W, Lu Y, Yuan S. ...
  • Sun Y, Fu L, Fu Z, Shan A, Lavernia EJ. ...
  • Figueiredo RB, Langdon TG. Grain refinement and mechanical behavior of ...
  • Ebrahimi GR, Maldar AR, Ebrahimi R, Davoodi A. The effect ...
  • Siahsarani A, Samadpour F, Mortazavi MH, Faraji G. Microstructural, Mechanical ...
  • نمایش کامل مراجع