Comparison of different failure criteria for wellbore stability prediction
محل انتشار: دومین کنگره مهندسی نفت ایران
سال انتشار: 1386
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,166
فایل این مقاله در 13 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IPEC02_083
تاریخ نمایه سازی: 22 خرداد 1391
چکیده مقاله:
Hole problems (such as lost circulation, where tensile failure has occurred, and spalling and hole closure in case of compressive failure) during drilling are often the consequence of mechanical wellbore instability. This leads to loosing time, higher costs and in severe case loosing of hole. This paper focuses on stresses around the wellbore. However, there is no clear choice of which compressive failure criterion in the analysis. Therefore, we first review and define a number of failure criteria that are commonly used in rock mechanics. Then, verify the required formula for critical wellbore pressure and stability analysis. Finally, by means of a visual C++6 computer programming code, written for this research, we could compare the outputs based on different failure criteria, and appropriate decisions were made
کلیدواژه ها:
نویسندگان
Amir Ahamdi
University of Ppetroleum Engineering, Tehran Iran
M. R. Asef
Tarbiat Moallem University, Geology Dept, Tehran, Iran
M. Afshar
University of Ppetroleum Engineering, Tehran Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :