Numerical Investigation of the Effect of Thermal Barrier Coating on Heat Transfer and Wall Temperature in V۹۴.۲ Gas Turbine Combustor
محل انتشار: نهمین کنفرانس سوخت و احتراق ایران
سال انتشار: 1400
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 187
فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
CCI09_055
تاریخ نمایه سازی: 2 خرداد 1401
چکیده مقاله:
Thermal barrier coating (TBC) has been considered in current investigation in order to increase mixing chamber and inner casing lifetime in V۹۴.۲ gas turbine combustor. These parts are exposed to hot flow produced by burner. Based on the mentioned concerns, on the hot side, TBC has been considered. The temperature gradient for turbulent flow and casings are presented. The results have shown that by using TBC, heat flux rate declined notably compared to the case where TBC was not applied. In the existence of TBC, the temperature distribution has changed significantly, which is important in changing the wall temperature of the combustor. The maximum temperature in the mixing chamber decreased by ۱۶۰ K whereas in the inner casing maximum temperature dropped by ۲۴ K. Hot spots in mixing chamber and inner casing are considerably reduced. The heat flux rate in mixing chamber is higher than that of inner casing since the temperature difference and convection heat transfer coefficient in mixing chamber is higher.
کلیدواژه ها:
نویسندگان
Sina Sani
Engineering Unit, Combustion Department, Turbotec Company, Tehran, Iran
Milad Mohammadi
Test Unit, Combustion Department. Turbotec Company, Tehran, Iran
Mahdi Baghaee
Upgrading Unit, Combustion Department, Turbotec Company, Tehran, Iran,
Mohammad Ali Soroudi
Head of Combustion Department. Turbotec Company, Tehran, Iran
Mohammad Alizadeh
Vice President of Engineering, Turbotec Company, Tehran, Iran