Experimental Evaluation on Palm oil and Sesame oil-Based Resin Properties as Core Sandwich Material for Lightweight Ship Structure
محل انتشار: ماهنامه بین المللی مهندسی، دوره: 35، شماره: 9
سال انتشار: 1401
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 125
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJE-35-9_003
تاریخ نمایه سازی: 10 اردیبهشت 1401
چکیده مقاله:
Research on lightweight material on ship structure has taken giant steps during the last decade. One reason is that shipping activities have increased and, therefore, the possibility of increasing the carrying cargo capacity in a realistic way using advanced lightweight material. This article summarizes a research investigation regarding the experimental tests of vinyl ester bio resin material using palm oil and sesame oil based on Lloyd's Register (LR) standard. Several tests are conducted, including density, water absorption test, Fourier transformed infrared test (FTIR), scanning electron microscope (SEM), and mechanical tests to evaluate the effect of ۲-۱۰% addition of vegetable oils on mechanical properties. The influence of the addition of vegetable oils is successfully characterized using physical measurements, which indicate the possible formation of a polymer blend to increase in elongation value. Mechanical testing shows that adding vegetable oils causes a decrease in average density, hardness, bending strength, and tensile strength. The bending strength decreases about ۹.۲۰ – ۴۷.۰۶% for ۲-۱۰% palm oil addition and ۵.۳۳ – ۴۲.۴۰% for sesame oil addition. Moreover, vegetable oil causes a tensile strength decrease of about ۵-۱۸.۷۵% on palm oil and ۳.۷۵-۱۳.۷۵% on sesame oil. As summarized, bio resin based on sesame oil has better mechanical behavior with the oil addition of ۴-۸% fulfills all Lloyd’s Register criteria.
کلیدواژه ها:
نویسندگان
Tuswan Tuswan
Department of Naval Architecture, Universitas Diponegoro, Indonesia
Eli Sari
Departement of Mechanical Engineering, Universitas Billfath, Lamongan, Indonesia
Abdi Ismail
Ship Machinery Study Program, Faculty of Vocational Studies, Indonesia Defense University, Belu, Indonesia
Aditya Prabowo
Department of Mechanical Engineering, Universitas Sebelas Maret, Surakarta, Indonesia