Effects of Inlet Types and Lengths on the Flow Field of Cyclone Separators
سال انتشار: 1401
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 132
فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JAFM-15-2_023
تاریخ نمایه سازی: 18 بهمن 1400
چکیده مقاله:
The effect of inlet type and length on the flow field was considered computationally for seven cyclone separators. The turbulent model was described by the Reynolds Stress Model (RSM). The air-water interface in underflow pipe and the spatial distribution of particles were tracked by the Volume of Fluid (VOF) model and Discrete Phase Model (DPM), respectively. Comparison investigations showed that inlet type and length had important impacts on flow field of cyclone. The instability flow field and back mixing phenomena were eliminated in symmetric double-inlet cyclone. The turbulent dissipation is obvious with a short inlet length. When it increased to ۱.۲۵D/۲, the area and intensity of the turbulent dissipation tended to be stable. The optimum cyclone is the symmetric double-inlet with inlet length of ۱.۲۵D/۲. When the particle diameter was larger than ۵ μm, the complete separation could be realized.
کلیدواژه ها:
نویسندگان
S. Y. Wu
School of Mechanical Engineering, Xiangtan University, Xiangtan ۴۱۱۱۰۵, China
Y. W. Xiao
School of Mechanical Engineering, Xiangtan University, Xiangtan ۴۱۱۱۰۵, China
C. D. Nie
School of Energy Science and Engineering, Central South University, Changsha, Hunan ۴۱۰۰۸۳, China
Z. M. Wu
School of Chemical Engineering, Xiangtan University, Xiangtan ۴۱۱۱۰۵, China
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :