A CLOSED-FORM NON- LINEAR SOLUTION FOR PLASTIC FLANGE WRINKLING OF CIRCULAR PLATES IN DEEP DRAWING PROCESS
محل انتشار: ماهنامه بین المللی مهندسی، دوره: 23، شماره: 5
سال انتشار: 1389
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 189
فایل این مقاله در 12 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJE-23-5_001
تاریخ نمایه سازی: 17 بهمن 1400
چکیده مقاله:
This paper deals with two-dimensional plane stress wrinkling model of a plastic annular plate. Based on energy method and the nonlinearity of strain-displacement law, a bifurcation function in polar coordinates is derived analytically. This technique leads to the critical conditions for the onset of the plastic wrinkling of flange during the deep drawing process. To find this solution, the Tresca yield criterion along with plastic deformation theory are employed. The material of the plate is assumed to behave perfectly plastic. This analytical closed-form solution is obtained by considering the nonlinearity of the material and geometry, simultaneously. The main advantage of the proposed solution is better agreement to the other researchers's experimental results. Moreover, the influence of the blankholder upon wrinkling, and also on the number of the generated waves, can be quantitatively predicted by the suggested scheme.
کلیدواژه ها:
نویسندگان
Farzad Moayyedian
Mechanical Engineering, Eqbal Lahouri Institute of Higher Education