Experimental Investigation on the Effect of Increasing the Collar Thickness on the Flow Pattern around the Oblong Pier in ۱۸۰˚ Sharp Bend with Balanced Bed
سال انتشار: 1398
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 302
فایل این مقاله در 16 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JAFM-13-1_020
تاریخ نمایه سازی: 15 دی 1400
چکیده مقاله:
In this paper, the effect of increase collar thickness has been investigated by considering other parameters affecting the flow pattern around the oblong bridge pier located at ۹۰˚ from the ۱۸۰˚ bend constant. Data acquisition was performed using the Vectrino ۳D velocimeter. The leveling of the collar in both tests is constant and ۰.۴ times the pier diameter above the initial bed surface. The flow conditions were close to the motion threshold and bed balanced. The results showed that with an increase in the thickness of the collar by a factor of ۴, the barrier surface is located in the flow path and the flow is deviated to the bed by colliding with the edge of the collar. This flow deviation that was due to the increase the collar thickness, led to ۳۰% increase in the maximum depth of the scour hole upstream of the pier. Also, with the increase in the thickness of the collar, the tendency of the streamlines upstream of the pier to the inner bank increased, resulting in a ۲۰% increase in the maximum sedimentation near the inner bank. The maximum turbulent kinetic energy at ۸۰ degrees of the bend, corresponds with a protected pier with ۳ mm thickness, equal to ۶۲۰ cm۲/s۲.gr, which is reduced by ۶۰% with increasing collar thickness.
کلیدواژه ها:
نویسندگان
M. Moghanloo
Department of Civil Engineering, Persian Gulf University, Shahid Mahini St., Bushehr, ۷۵۱۶۹۱۳۸۱۷, Iran
M. Vaghefi
Department of Civil Engineering, Faculty of Engineering, Persian Gulf University, Bushehr۷۵۱۶۹۱۳۷۹۸, Iran
M. Ghodsian
Faculty of Civil and Environmental Engineering, Tarbiat Modares University, Tehran, Iran